6 Ways to Keep Your Bathroom Grout Stain-Free

Grout is the material you find between each tile that keeps it in place on walls, floors, and countertops. These areas can become filled with soap scum, mold, and mildew when not cleaned properly. These stains make the bathroom look uncared for when allowed to build up. You want to have the bathroom looking great if the need arises to call in a plumber Toronto. Below are six ways you can keep your grout looking clean and fresh.

1. Seal the Grout

One of the most effective ways to keep the grout from becoming soiled and stained is to seal it with a quality product after a good cleaning, or immediately following initial installation. Sealing grout will eliminate water getting into the material and setting up conditions for mold and mildew growth.

2. Wipe Tile After Each Shower

You have the opportunity of doing a quick clean after every shower. The warm, wet tiles are easy to wipe down and cleaned with a small amount of effort. It is beneficial to do this and dry the tiles at the same time. Leftover beaded water can drip onto the grout and leave you with a gradual mold and mildew stain problem.

3. Scrub Using Hot Water

A good medium bristle scrub brush and a little hot water can easily remove built-up soap film. Pure hot water is the preferred method for anyone that is sensitive to chemical cleaners and is not battling a problem with mold and mildew. Once you have scrubbed the tile and grout, let it drip dry for a few minutes and finish drying with an absorbent towel.

4. Hot Water and Baking Soda

You can add the use of baking soda with hot water if there are visible stains from mold or mildew. The baking soda is a natural product that will not harm the tile and grout. It is also considered safe for contact with the skin. The baking soda will act as a soft abrasive and give you additional power to scrub the stains away. Rinsing with clear water is easy. Dry the tile and grout with a towel for the perfect finishing touch.

5. Use a Safe Commercial Cleaner

There are numerous products on the market that are specifically designed to clean tile and grout safely. Be sure to use ones that are intended for grout and do not contain acid of any type. Products with vinegar or citric acid can prove harmful to grout. Acid pitted grout the stain problem worsens. It can also lead to tiles loosening.

6. Provide Plenty of Bathroom Ventilation

Creating and keeping a good airflow in the bathroom helps eliminate moisture problems that can cause staining of tile grout. Keep the bathroom open when the bathroom is not in use. Use the overhead vent fan after every shower and bath. These simple steps will keep the room dryer, which is a positive for grout.

Controlling moisture, frequent cleaning, and providing airflow are the best solutions for keeping your bathroom tile and grout looking great. Adding a couple of these tips to your daily routine will make a big difference.

Leave a Reply

Your email address will not be published. Required fields are marked *